Cable Test Termination For PD Detecting , Deionized Water
Termination For XLPE Cable
I. Product Description:
CTS series Cable Test Termination is applied for power cable PD
test , cable breakdown voltage test and tan delta test in the high
voltage test station. It is corona-free with easy connection .Two
types of this series are provided: oil test termination for XLPE
cables under 35kV and XLPE cables 66kV~500kV and deionized water
termination for XLPE cables 66kV~500kV.
- Cable PD test
- Cable breakdown voltage test
- Cable tan delta test
- Cable partial discharge test
- Corona-free cable termination
III. Why to use this device
During the testing, testing oil termination for HV (110kV and
above) cables requires more conditions in that the testing
application principle is to strengthen the insulation level of test
objects and improve the breakdown field strength. For 110 kV and
above cross-linking cable test, however, only improving field
strength is far from enough to meet test requirements. Water
termination is further needed in the test for uniforming electric
field distribution. That’s why CTS - Series Water Termination
System is developed .
The high voltage cable termination equipments of the test system
are developed to reliably test the solid medium coaxial high
voltage cable under no corona condition.
The cable termination equipment can meet to test short cables or
longer cables . It only takes about 15 minutes to install and
connect the termination system with test cables.